California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 2 - Safe Practices and Personal Protection
Article 7 - Miscellaneous Safe Practices
Section 3324 - Horizontal Sliding Gates

Universal Citation: 8 CA Code of Regs 3324

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) All horizontal sliding gates shall be equipped with positive stops or devices that limit the gate travel to the designed fully open and closed positions.

(b) Positive stops or devices shall be constructed, installed and maintained by a qualified person to resist impact loads in order to safely contain sliding gate components within the designed stop limits.

(c) Employees responsible for operating or inspecting horizontal sliding gates shall be instructed in the safe operation of such gates.

(d) Repairs to gate hardware shall only be performed by a qualified person.

1. New section filed 10-23-2007; operative 11-22-2007 (Register 2007, No. 43).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.