California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 13 - Cranes and Other Hoisting Equipment
Article 93 - Boom-Type Mobile Cranes
Section 4930 - Load Hoist Brakes

Universal Citation: 8 CA Code of Regs 4930

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) When power-operated brakes having no continuous mechanical linkage between the actuating and braking means are used for controlling loads, an automatic means shall be provided to prevent the load from falling in the event of loss of brake actuating power.

(b) Foot-operated brake pedals shall be maintained so that the operator's foot will not easily slip off.

(c) Means shall be provided for holding the brakes in the applied position without further action by the operator.

1. Amendment of subsections (b) and (c) filed 8-29-86; effective thirtieth day thereafter (Register 86, No. 39).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.