California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 13 - Cranes and Other Hoisting Equipment
Article 93 - Boom-Type Mobile Cranes
Section 4921 - Operating Controls

Universal Citation: 8 CA Code of Regs 4921

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Lever-operated controllers shall be provided with a device which will hold the handle in the "off" position, requiring voluntary effort to remove it from the "off" to the "on" position.

(b) The operating controls shall be located within convenient reach of the operator and shall be identified by marking or a legible chart to indicate the motion controlled and the direction.

(1) To start and stop;

(2) To control speed of internal combustion engines;

(3) To stop engines under emergency conditions;

(4) For shifting selective transmission.

1. Amendment filed 8-29-86; effective thirtieth day thereafter (Register 86, No. 39).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.