California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 7 - General Industry Safety Orders
Group 13 - Cranes and Other Hoisting Equipment
Article 101 - Slings
Table S-1 - Rated Capacity (Working Load Limit), for Alloy Steel Chain Slings* Rated Capacity (Working Load Limit), Pounds
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(1) Rating of multileg slings adjusted for angle of loading measured as the included angle between the inclined leg and the vertical as shown in Figure S-5.
(2) Rating of multileg slings adjusted for angle of loading between the inclined leg and the horizontal plane of the load, as shown in Figure S-5.
(3) Quadruple sling rating is same as triple sling because normal lifting practice may not distribute load uniformly to all 4 legs.
* Other grades of proof tested steel chain include Proof Coil, BBB Coil and Hi-Test Chain. These grades are not recommended for overhead lifting and therefore are not covered by this Order.
1. New
NOTE filed 5-1-87; operative 5-31-87 (Register 87, No. 19).
2.
Change without regulatory effect amending footnote filed 4-13-2004 pursuant to
section 100, title 1, California Code of
Regulations (Register 2004, No. 16).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
