California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 6 - Elevator Safety Orders
Group III - Installations Defined by Section 3000(f) of these Orders. Elevator Installations for Which the Installation Contract Was Signed on or After October 25, 1998, but Before May 1, 2008
Article 21 - Machinery and Equipment for Electric Elevators
Section 3121.0 - Car and Counterweight Guide Rails, Guide-Rail Supports and Fastenings
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
Car and counterweight guide rails, guide-rail supports and fastenings shall comply with Section 200 of ASME A17.1-1996, which is hereby incorporated by reference.
(a) Guide rail supports and fastenings shall comply with section 3030(k)(3).
(b) Where slots are used for adjustment of the distance between guide rails, the brackets shall be secured in their final position by a bolt not less than 3/8 inch diameter or by welding.
(Title 24, Part 7, Section 7-3121.0.)
1. New article 21 (sections 3121.0-3121.14) and section filed 9-25-98; operative 10-25-98 (Register 98, No. 39).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code; and Section 18943(b), Health and Safety Code.
