California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 6 - Elevator Safety Orders
Group I - Administrative Regulations
Article 5 - Standard Reference Documents
Section 3004 - Authority for Standard
Universal Citation: 8 CA Code of Regs 3004
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
|
Authority for Standard |
Date of Issue |
Title or Description of Standard |
See Section |
| AGMA: | |||
| 420.03 | 1963 | Practice for Helical and Herringbone Gear Speed Reducers | 3091(n) (4) |
| 430.03 | 1963 | Practice for Speed Reducers and Increasers Employing Spiral Bevel Gearing | 3091(n) (4) |
| 440.03 | 1959 | Practice for Single and Double Reduction Cylindrical-Worm and Helical-Worm Speed Reducers | 3091(n) (4) |
| 441.03 | 1963 | Practice for Single and Double-Reduction, Double-Enveloping Worm and Helical-Worm Speed Reducers | 3091(n) (4) |
| 460.04 | 1965 | Practice for Gearmotors | 3091 (n) (4) |
| 480.03 | 1965 | Practice for Helical, Herringbone and Spur Gear Shaft Mounted Speed Reducers | 3091(n) (4) |
| ASTM: | |||
| A36 | 1968 | Specification for Structural Steel | 3101(a) (1) |
| A235 | 1967 | Specifications for Carbon Steel Forgings for General | 3101(a) (1) |
| Industrial Use | 3107(b) (3) | ||
| 3107(b) (5) | |||
| A283 | 1967 | Specifications for Low and Intermediate Tensile Strength Carbon Steel Plate of Structural Quality | 3101(a) (1) |
| A307 | 1967 | Specifications for Low Carbon Steel Externally | 3101(a) (1) |
| and Internally Threaded Standard Fasteners | 3109(b) (2) | ||
| 3111(c) (1) | |||
| 3111(c) (2) | |||
| A502 | 1965 | Specifications for Steel Structural Rivets | 3101(a) (1) |
| 3109(b) (3) | |||
| 3111(c) (2) | |||
| D2270 | 1964 | Viscosity Index from Kinematic Viscosity | 3108(e) |
| SAE: | |||
| 100-R2 | 1967 | High Pressure Steel Wire Reinforced Rubber Covered Hydraulic Hose | 3068(a) (3) |
| Federal | |||
| Specification | |||
| DD-G-451c | 1968 | Glass, Plate, Sheet, Figured (Float, Flat, for Glazing, Corrugated, Mirrors, and Other Uses) | 3034(b) (5) (E) |
| USAS: | |||
| A2.5 | 1963 | Method of Test for Surface Burning Characteristics | 3101(a) (3) |
| ASTM 84 | 1961 | of Building Materials | |
| NFPA 255 | 1961 | ||
| A17.1 and | 1965 | Safety Code for Elevators, Dumbwaiters, Escalators, | 3000(d) |
| Supplements | and Moving Walks | 3108(f)(1) | |
| .1a | 1967 | ||
| .1b | 1968 | ||
| .1c | 1969 | ||
| B2.1 | 1968 | Pipe Threads (Except Dry Seal) | 3102(g) (5) |
| B29.1 | 1963 | Transmission Roller Chains and Sprocket Teeth | 3091(n) (5) |
| B29.2 | 1957 | Inverted Tooth (Silent) Chains and Sprocket Teeth | 3091(n) (5) |
| B31.1.0 | 1967 | Power Piping | 3102(g) (2) |
| B55.1 | 1961 | Specifications for Multiple V-Belt Drives | 3091(n) (6) |
| G50.1 | 1967 | Specifications for Mild to Medium Strength Carbon | 3101(a) (1) |
| ASTM A27 | 1965 | Steel Castings for General Application | 3107(b) (3) |
| Z11.5 | 1966 | Method of Test for Pour Point | 3108(e) |
| ASTM D97 | 1966 | ||
| Z97.1 | 1966 | Performance, Specifications and Method of Test | 3034(a) (7) |
| for Transparent Safety Glazing Materials Used | 3034(b) (5) | ||
| in Buildings | 3089(d) (2) | ||
| 3091(k) (1) | |||
| 3091(l) |
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
