California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 5 - Electrical Safety Orders
Group 2 - High-Voltage Electrical Safety Orders
Article 7 - General Requirements-Wiring Methods
Section 2747 - Inserting Conductors in Raceways

Universal Citation: 8 CA Code of Regs 2747
Current through Register 2024 Notice Reg. No. 38, September 20, 2024

Raceways, except those used for exposed work and having a removable cover, shall first be installed as a complete raceway system without the conductors. Pull wires, if used, shall not be installed until the raceway system is in place.

Approved pulling compound shall be permitted to be used as a lubricant in inserting conductors in raceways. Cleaning agents or lubricants having a deleterious effect on conductor coverings shall not be used.

1. Editorial correction filed 11-2-83 (Register 83, No. 45).
2. Amendment filed 12-10-87; operative 1-9-88 (Register 88, No. 1).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.