California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 5 - Electrical Safety Orders
Group 2 - High-Voltage Electrical Safety Orders
Article 4 - Service and Service Entrance Equipment
Section 2732 - Paralleling and Isolating Switches

Universal Citation: 8 CA Code of Regs 2732

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Two or more sets of service entrance conductors which can be operated in parallel shall be provided with a suitable means to isolate each set from all other sets of service entrance conductors.

(b) The paralleling switch or switches intended to make and break parallel shall conform to Article 20 or 21.

(c) Operation of paralleling switches shall be restricted to qualified and authorized persons only. A written switching procedure shall be made available to and followed by such personnel.

(Title 24, Part 3, Section 3-230 - 216.)

1. Editorial correction filed 11-2-83 (Register 83, No. 45).
2. Amendment filed 12-10-87; operative 1-9-88 (Register 8, No. 1).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code; and Section 18943(c), Health and Safety Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.