California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 5 - Electrical Safety Orders
Group 2 - High-Voltage Electrical Safety Orders
Article 15 - Temporary Wiring
Section 2799.2 - Branch Circuits
Universal Citation: 8 CA Code of Regs 2799.2
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
The following requirements apply to branch circuits:
(a) Branch circuits shall originate in an approved panelboard.
(b) Conductors shall be multiconductor cord or cable assemblies or open conductors.
(c) No branch-circuit conductor may be laid on the floor.
(d) Each branch circuit that supplies fixed equipment shall contain a separate equipment grounding conductor if run as open conductors.
1. New section filed 4-1-2009; operative 4-1-2009. Submitted to OAL for printing only pursuant to Labor Code section 142.3 (Register 2009, No. 14).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
