California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 5 - Electrical Safety Orders
Group 2 - High-Voltage Electrical Safety Orders
Article 11 - Metal-Enclosed Bus
Section 2771 - Identification

Universal Citation: 8 CA Code of Regs 2771

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

Each bus run shall be provided with a permanent nameplate on which the following information shall be provided:

(a) Rated voltage.

(b) Rated continuous current; if bus is forced cooled, both the normal forced cooled rating and the self-cooled (not forced cooled) rating for the same temperature rise shall be given.

(c) Rated frequency.

(d) Rated impulse withstand voltage.

(e) Rated 60-cycle withstand voltage (dry).

(f) Rated momentary current.

(g) Manufacturer's name and address.

NOTE: Metal-enclosed buses shall be constructed and tested in accordance with ANSI C37.20--1969.

(Title 24, Part 3, Section 364-21.)

1. Editorial correction filed 11-2-83 (Register 83, No. 45).
2. Editorial correction filed 11-3-83 (Register 83, No. 45).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code; and Section 18943(c), Health and Safety Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.