California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 5 - Electrical Safety Orders
Group 1 - Low-Voltage Electrical Safety Orders
Article 76 - Sound Recording and Similar Equipment
Section 2564.6 - Grouping of Conductors
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
Conductors of different systems grouped in the same conduit or other metal enclosure or in portable cords or cables shall comply with (a) through (c) below.
(a) Power-Supply Conductors. Power-supply conductors shall be properly identified and shall be used solely for supplying power to the equipment to which the other conductors are connected.
(b) Leads to Motor Generator or Rotary Converter. Input leads to a motor generator or rotary converter shall be run separately from the output leads.
(c) Conductor Insulation. The conductors shall be insulated individually, or collectively in groups, by insulation at least equivalent to that on the power supply and other conductors.
EXCEPTION: Where the power supply and other conductors are separated by a lead sheath or other continuous metallic covering.
(Title 24, Part 3, Section 640-6.)
1. Editorial correction filed 11-2-83 (Register 83, No. 45).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code; and Section 18943(c), Health and Safety Code.
