California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 5 - Electrical Safety Orders
Group 1 - Low-Voltage Electrical Safety Orders
Article 56 - MOTORS, MOTOR CIRCUITS AND CONTROLLERS
MOTOR CONTROLLERS
Section 2530.82 - Controller Design
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) Starting and Stopping. Each controller shall be capable of starting and stopping the motor it controls, and shall be capable of interrupting the stalled-rotor current of the motor.
(b) Autotransformer. An autotransformer starter shall provide an off position, a running position, and at least one starting position. It shall be so designed that it cannot rest in the starting position or in any position that will render the overload device in the circuit inoperative.
(c) Rheostats. Rheostats shall be in compliance with the following:
(Title 24, Part 3, Section 430-82.)
1. Editorial correction filed 11-2-83 (Register 83, No. 45).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code; and Section 18943(c), Health and Safety Code.