California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 4 - Construction Safety Orders
Article 3 - General
Section 1518 - Protection from Electric Shock
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) Suitable protective equipment or devices shall be provided and used on or near energized equipment for the protection of employees where there is a recognized hazard of electrical shock or burns.
(b) When protective insulating equipment is used, it shall comply with the Electrical Safety Orders.
(c) In lieu of other protective equipment, barricades shall be used to provide protection from exposed, energized equipment.
(d) Before work is begun, the employer shall ascertain by inquiry, direct observation, or by instruments, whether any part of an energized electric power circuit, exposed or concealed, is so located that the performance of the work may bring any person, tool or machine into physical or electrical contact with the electric power circuit.
NOTE: Section 1518(d) applies to electrical installations present on the jobsite which do not involve excavations. For electrical installations involving excavations as defined in Section 1540, see Section 1541.
1. Repealer and new section filed 7-12-74; effective thirtieth day thereafter (Register 74, No. 28).
2. Repealer and new section filed 9-27-85; effective thirtieth day thereafter (Register 85, No. 40).
3. Amendment of subsection (c) and new subsections (d)-(d)(2) filed 1-27-2006; operative 2-26-2006 (Register 2006, No. 4).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.