California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 4 - Construction Safety Orders
Article 27 - Powder-Actuated Tools
Section 1689 - Maintenance and Storage

Universal Citation: 8 CA Code of Regs 1689

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) The tool shall be serviced and inspected for worn or damaged parts at regular intervals as recommended by the tool manufacturer. Prior to the tool being put back into use, all worn or damaged parts shall be replaced by a qualified person. A record of this inspection and service shall be noted and dated on the tool inspection record.

(b) Instruction manuals, maintenance tools and accessories supplied with the tool shall be stored in the tool container when not in use.

(c) Powder-actuated tools and power loads shall be locked in a container and stored in a safe place when not in use and shall be accessible only to authorized personnel.

1. New NOTE filed 10-16-84; effective thirtieth day thereafter (Register 84, No. 42).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.