California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 20 - Tunnel Safety Orders
Article 15 - Drilling
Section 8449 - General Requirements

Universal Citation: 8 CA Code of Regs 8449

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Drilling

(1) A competent person shall inspect all drilling and associated equipment prior to use. Equipment defects affecting safety shall be corrected before the equipment is used.

(2) The drill area shall be inspected for hazards before the drilling operation is started.

(3) Employees shall not be allowed on a drill mast while the drill bit is in operation or the drill machine is being moved.

(4) Drills on columns shall be anchored firmly before starting drilling, and shall be retightened as necessary thereafter.

(5) Scaling bars shall be available at all underground drill sites.

1. Amendment of Article 15 heading and new section filed 3-5-96; operative 4-4-96 (Register 96, No. 10).

Note: Authority cited: Sections 142.3 and 7997, Labor Code. Reference: Sections 142.3 and 7997, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.