California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 17 - Mine Safety Orders
Article 36 - Hoisting Equipment
GENERAL
Section 7140 - (19-90). Dual Signaling System

Universal Citation: 8 CA Code of Regs 7140

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Every shaft in which men are hoisted or lowered shall be provided with a dual electrical system for shaft signaling.

(b) When a dual method of signaling is employed, one shall be a bell system to signal for movement of the shaft conveyance. It shall be used for no other purpose.

The second method shall be used to call for the shaft conveyance and may also be used for other communications, except to signal for movement of the shaft conveyance. This method shall consist of a system of telephones with buzzers or horns loud enough to be heard clearly.

(c) (19-92) The control for the signal for movement of the shaft conveyance shall be located at the shaft, within easy reach of a person in the shaft conveyance.

(d) The control for the signal used to call for the shaft conveyance shall be in a convenient location well away from the shaft.

(e) (19-10) Hoist controls shall be placed or hosed so that the noise from machinery or other sources will not prevent hoist men from hearing signals.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.