California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 17 - Mine Safety Orders
Article 21 - Mine Ladders and Travelways
UNDERGROUND
Section 7052 - (9-103). Chutes and Ore Passes
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) Chutes and ore passes shall be guarded.
(b) Employees shall be protected against falling into the chute by one or more of the following methods:
(c) Active chutes and ore passes shall be kept in good repair so that material will not spill into a manway.
(d) Chute gates shall be maintained in safe and easily operable condition.
(e) To protect the hands and arms of trammers and train crews, a safe clearance of not less than 6 inches shall be maintained between any part of a chute and the top of every car that is operated under such chute.
(f) (9-106) Ample warning shall be given to men who may be affected by the draw or otherwise exposed to danger from chute-pulling operations.
(g) (9-107) Men shall not stand on broken rock or ore over draw points if there is danger that the chute will be pulled. Suitable platforms or safety lines shall be provided when work must be done in such areas.