California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 14 - Petroleum Safety Orders-Drilling and Production
Article 43 - Lines Used on Catheads
Section 6645 - Chain Used for Spinning Lines
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) Chain shall not be used either wholly or in part with any cathead except as a spinning line.
(b) Chain used in a spinning line shall be of a type designed for that purpose.
(c) Every chain used in a spinning line shall have a fiber tail rope not more than twelve inches (12") or less than six inches (6") in length, secured to the pipe end of the chain for employees to hold when rotating pipe with the chain.
(d) No part of any chain that has been broken shall be used in a spinning line.
(e) A chain having a distorted or worn link beyond the manufacturer's mark or the indicator shall be discarded at once from further use as a spinning line.
(f) Chains which have been connected together for use as a spinning line shall be connected and used as follows:
In event of rupture of a link in the section of larger chain, both sections of chain shall be discarded at once from further use as a spinning line.
1.
Amendment filed 7-20-59; effective thirtieth day thereafter (Register 59, No.
12).
2. Amendment of section and NOTE filed 5-8-95; operative 6-7-95
(Register 95, No. 19).
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.