California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 14 - Petroleum Safety Orders-Drilling and Production
Article 40 - Traveling Blocks and Hooks or Similar Devices
Section 6638 - Traveling Blocks and Traveling Block Hooks or Similar Devices

Universal Citation: 8 CA Code of Regs 6638

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Every traveling block and traveling block hook, including their component parts, shall be designed, constructed, installed and maintained to conform with good engineering practices.

(b) No traveling block, traveling block hook or their component parts shall be subjected to a load in excess of that for which they are designed.

(c) Every traveling block shall be guarded to minimize the hazard of contact with the sheaves and their nip points.

(d) Every traveling block hook shall be equipped with a safety latch or other device to close the opening in the hook and to prevent the load from becoming disengaged from the hook.

(e) All equipment attached either directly or indirectly to, and suspended from, the traveling block hook shall be securely fastened.

1. Amendment filed 7-20-59; effective thirtieth day thereafter (Reg. 59, No. 12).
2. Amendment of section and NOTE filed 5-8-95; operative 6-7-95 (Register 95, No. 19).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.