California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 14 - Petroleum Safety Orders-Drilling and Production
Article 35 - Drilling and Well-Servicing Machinery and Equipment
Section 6624 - Construction and Maintenance of Drilling and Well Servicing Equipment

Universal Citation: 8 CA Code of Regs 6624

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Drilling and well-servicing machinery and equipment when in use shall be designed, constructed, installed and maintained to conform to good engineering practice.

(b) Kelly spinner and pipe spinner controls shall be identified and shall be designed or guarded so as to prevent accidental actuation.

(c) Unless the purpose is self-evident, controls shall be labeled to identify the equipment and operation they control.

1. Amendment filed 7-20-59; effective thirtieth day thereafter (Register 59, No. 12).
2. Deletion of article 36 heading and amendment of section heading, section and NOTE filed 5-8-95; operative 6-7-95 (Register 95, No. 19).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.