California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 14 - Petroleum Safety Orders-Drilling and Production
Article 19 - All Derricks, Masts and Supporting Structures
Section 6571 - Crown Blocks

Universal Citation: 8 CA Code of Regs 6571

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Each crown block sheave and crown block shall be securely fastened in place in a manner that will prevent it from jumping out of its bearings or becoming accidentally shifted or dislodged.

(b) Cast iron sheaves shall not be used in any crown block used for drilling or redrilling or remedial well servicing operations where rotary jars are used nor in any new crown block installed after the effective date of these orders.

Cast iron sheaves which were in use before the effective date of these orders may be used in routine well servicing operations.

1. Amendment filed 7-20-59; effective thirtieth day thereafter (Register 59, No. 12).
2. Amendment of section and NOTE filed 5-8-95; operative 6-7-95 (Register 95, No. 19).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.