California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 14 - Petroleum Safety Orders-Drilling and Production
Article 10 - Opening and Blinding Pipe Lines and Equipment
Section 6535 - Opening Pipe Lines and Equipment

Universal Citation: 8 CA Code of Regs 6535

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Before opening lines or other equipment, the pressure shall be reduced to atmospheric or as near atmospheric as is practicable. Employees shall be informed of the hazards from the contents of lines or equipment, and shall be instructed on precautions necessary.

(b) When practicable flammable gas or vapor lines and equipment shall be emptied of their contents. When necessary to protect employees, such lines or equipment shall be washed or steamed before being opened.

(c) All sources of ignition shall be eliminated or controlled and be sufficiently remote so as to present no hazard before bleeding or opening lines containing flammable liquids, gases or vapors.

1. Amendment filed 7-20-59; effective thirtieth day thereafter (Register 59, No. 12).
2. Amendment of subsections (a)-(c), repealer of subsections (d)-(e) and amendment of NOTE filed 5-8-95; operative 6-7-95 (Register 95, No. 19).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.