California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 14 - Petroleum Safety Orders-Drilling and Production
- Article 1 - Application and Variances
- Article 2 - Definitions
- Article 3 - Injury and Illness Prevention Program
- Article 4 - First Aid and Medical Services
- Article 5 - Dangerous Exposure
- Article 6 - Fires and Explosions
- Article 7 - Confined Spaces
- Article 8 - Gas and Vapor Testing
- Article 9 - Pipe Lines, Fittings, and Valves
- Article 10 - Opening and Blinding Pipe Lines and Equipment
- Article 11 - Drainage, Housekeeping and Leakage Control
- Article 12 - Hazardous Substances
- Article 13 - Agitation and Heating of Liquids in Tanks
- Article 14 - Reservoirs and Stationary Tanks
- Article 15 - Unfired Pressure Vessels, Boilers, and Fired Pressure Vessels and Pressure Relief Devices
- Article 16 - Gas Compressors and Engines
- Article 17 - Identification of Wells and Equipment
- Article 18 - Standard Type Derricks
- Article 19 - All Derricks, Masts and Supporting Structures
- Article 20 - Cellars and Shafts
- Article 21 - Access and Exits, Derrick and Mast Floors
- Article 22 - Safety Belts and Lanyards
- Article 23 - Erection of Derricks and Masts
- Article 24 - Guying Derricks and Masts
- Article 25 - Crown Platforms and Railings
- Article 26 - Pipe and Sucker Rod Platforms for Derricks and Masts
- Article 27 - Pipe Racking Supports for Derricks and Masts
- Article 28 - Ladders and Ladderway Openings for Derricks and Masts
- Article 29 - Tools, Equipment, and Materials in Derricks or Masts
- Article 30 - Back-up Posts, Kelly Pull-Back Posts, Back-up and Safety Lines for Pipe Tongs
- Article 31 - Handling Heavy Tools at Drilling Wells
- Article 32 - Rotary and Circulating Hose and Standpipe
- Article 33 - Rotary Drilling Machinery [Repealed]
- Article 34 - Standard Tool-Drilling Machinery [Repealed]
- Article 35 - Drilling and Well-Servicing Machinery and Equipment
- Article 37 - Oil Well Pumping Machinery and Equipment
- Article 38 - Pumps and Pump Pressure Relief Devices
- Article 39 - Guarding Sheaves for Telescoping, Jackknife, Gin Pole and Cantilever Derricks and Masts
- Article 40 - Traveling Blocks and Hooks or Similar Devices
- Article 41 - Wire Rope Lines
- Article 42 - Catheads for Well-Drilling and Well-Servicing Machinery
- Article 43 - Lines Used on Catheads
- Article 44 - Miscellaneous Tools and Equipment
- Article 45 - Pipe Handling and Storage Racks
- Article 46 - Liquid Loading and Unloading Facilities and Operations
- Article 47 - General Safety Provisions and Precautions
- Article 48 - Illumination
- Article 49 - Wharves and Piers
- Article 50 - Shafts at Oil Wells
- Article 51 - Rig-Building Equipment and Operations [Repealed]
- Article 52 - Prime Movers
- Article 53 - Line Spoolers and Dead Line Stabilizers
- Article 54 - Weight Indicators
- Article 55 - Blowout Prevention
- Article 56 - Attractive Nuisance Guards [Repealed]
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
