California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 13 - Logging and Sawmill Safety Orders
Article 3 - Logging Roads and Bridges
Section 6266 - Bridge Construction and Maintenance

Universal Citation: 8 CA Code of Regs 6266

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Bridges and their approaches shall be designed, constructed, and maintained to support the maximum anticipated load.

(b) All bridges and trestles shall be equipped with 8-inch by 8-inch or equivalent fenders, continuous lengthwise along both edges of the bridge deck. Center shears are permissible on temporary bridges in lieu of outside fenders.

(c) Railroad trestles and bridges shall be decked over if converted for motor transport.

(d) Conditions such as broken or missing decking, planks or other similar hazards which prevent the safe passage of equipment shall be immediately corrected.

1. Amendment of section heading and new subsection (d) filed 2-6-85; effective thirtieth day thereafter (Register 85, No. 6).

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.