California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 13 - Logging and Sawmill Safety Orders
Article 16 - Veneer and Plywood Plants
Section 6386 - Edge Gluer Jointer
Universal Citation: 8 CA Code of Regs 6386
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) A barrier shall be installed at the end of the travel of the head to prevent flying splinters from injuring personnel.
(b) A gate shall be installed to prevent access between the edge gluer jointer and the grasshopper, arranged so that when the gate is opened, all electricity, air, and hydraulic lines will be shut off and the cylinders bled.
(c) A device shall be positioned across the front of the in-feed nip point, arranged to shut off the equipment if contact is made with it.
Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
