California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 13 - Logging and Sawmill Safety Orders
Article 15 - Sawmills
Section 6344 - Log Hauls

Universal Citation: 8 CA Code of Regs 6344

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Log conveyors shall be solidly built, kept in good repair, and of sufficient strength to support five times the maximum load.

(b) Log conveyor bull chains or cables shall be designed and built with an adequate safety factor.

(c) The return strand of chain log conveyors in the basement shall be guarded so that in the event of breaking, they cannot fall on anyone beneath.

(d) Log conveyor controls shall be identified and arranged to be operated from a position where the operator is in the clear of logs, machinery, lines, and rigging.

(e) A positive stop or bulkhead shall be installed on all log conveyors to prevent logs traveling too far ahead in the mill.

(f) Employees shall not work under logs which are being hoisted to the log deck.

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.