California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 13 - Logging and Sawmill Safety Orders
Article 11 - Helicopter Yarding Operations
Section 6321 - Rigging

Universal Citation: 8 CA Code of Regs 6321

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Loads shall be properly slung.

(b) Taglines shall be of a length and/or properly weighted so that they can not be drawn up into the rotors. Pressed sleeves, swedged eyes or the equivalent shall be used for all freely suspended loads.

(c) Taglines shall be long enough to allow helicopters to remain above all obstacles.

(d) All electrically operated cargo hooks shall have the electrical activating device designed and installed to prevent inadvertent operation.

(e) Cargo hooks shall be equipped with an emergency mechanical, electrical, or manual control for releasing the load.

(f) The employer shall ensure that cargo hooks are tested prior to each day's operation by a competent person to determine that the release functions properly, both electrically and mechanically.

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.