California Code of Regulations
Title 8 - Industrial Relations
Division 1 - Department of Industrial Relations
Chapter 4 - Division of Industrial Safety
Subchapter 13 - Logging and Sawmill Safety Orders
Article 10 - Portable Metal Spars
Section 6313 - Identification and Capacity Markings

Universal Citation: 8 CA Code of Regs 6313

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

Each portable metal spar shall have identification and specification plates permanently attached to its base, in a position that can be easily read by a person standing on the ground or on the base platform. Plates shall contain the following information:

(a) Name of manufacturer, city and state where manufactured.

(b) Model number.

(c) Maximum size of mainline for which the spar is designed.

(d) Number and size of guylines and any other lines required.

(e) Maximum size of skyline, mainline, and haulback line that can be used if the spar is designed for a skyline, slackline, or modified slackline system.

(f) Maximum and minimum inclination at which the spar is designed to be operated.

Note: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3, Labor Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.