California Code of Regulations
Title 4 - Business Regulations
Division 9 - Division of Measurement Standards, Department of Food and Agriculture
Chapter 9 - Weighmaster Enforcement
Article 11 - Multiple Draft Weighing Operations
Section 4495.6 - Verification and Enforcement

Universal Citation: 4 CA Code of Regs 4495.6

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) When the gross weight or tare weight of a vehicle and connected combination is recorded on a weighmaster certificate, verification of that weight shall be made by reweighing the combination using the same multiple draft weighing operation authorized by the Department. At no time shall the reweigh weight differ from the recorded weight by more than twice the scale tolerance for that weighment.

(b) If a multiple draft weighing operation is found to produce weights that are beyond the established tolerance, the Department shall issue an order stating that the multiple draft weighing operation shall not be used until it is reestablished and reauthorized by the Department.

(c) Only the approved procedure shall be used when using a multiple draft weighing operation.

1. New section filed 9-9-99; operative 10-9-99 (Register 99, No. 37).

Note: Authority cited: Sections 12027, 12107 and 12735, Business and Professions Code. Reference: Section 12728(d)(2), Business and Professions Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.