California Code of Regulations
Title 4 - Business Regulations
Division 9 - Division of Measurement Standards, Department of Food and Agriculture
Chapter 9 - Weighmaster Enforcement
Article 11 - Multiple Draft Weighing Operations
Section 4495.4 - Certificate Requirements

Universal Citation: 4 CA Code of Regs 4495.4

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

When a multiple draft weighing operation is used by a weighmaster to determine the net weight of a product, the following information shall appear on the certificate:

(a) The fact that a multiple draft weighing operation is being used to determine the weights. This shall be designated by the words "Multiple Draft" immediately adjacent to both the gross and tare weights. As of January 1, 2000, the letters "M.D." may be substituted for the words "Multiple Draft".

(b) The identification of any connected vehicle not resting on the scale platform during certification.

These requirements are in addition to any other information required by California Business and Professions Code, Division 5, Chapter 7.

1. New section filed 9-9-99; operative 10-9-99 (Register 99, No. 37).

Note: Authority cited: Sections 12027, 12107 and 12735, Business and Professions Code. Reference: Section 12728(d)(2), Business and Professions Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.