California Code of Regulations
Title 4 - Business Regulations
Division 9 - Division of Measurement Standards, Department of Food and Agriculture
Chapter 9 - Weighmaster Enforcement
Article 10 - Timber Tare Weights
Section 4490 - Definitions

Universal Citation: 4 CA Code of Regs 4490

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

The following definitions apply to timber tare weights.

(a) A timber tare weight is the unladen weight of a vehicle or combination of vehicles, used to transport loads of logs, where an automated weight scaling program is used to determine the board foot volume of the load.

(b) Sample scale frequency is the number of loads of logs to be measured by a log scaler at a frequency agreed to by the buyer and seller, e.g., 1 in 4 loads must be measured by a log scaler.

1. New Article 10 (sections 4490-4493) and section filed 11-29-93; operative 12-29-93 (Register 93, No. 49).

Note: Authority cited: Sections 12027, 12723 and 12735, Business and Professions Code. Reference: Sections 12722, 12723 and 12729, Business and Professions Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.