California Code of Regulations
Title 4 - Business Regulations
Division 9 - Division of Measurement Standards, Department of Food and Agriculture
Chapter 9 - Weighmaster Enforcement
Article 1 - General Provisions
Section 4402 - Requirement for Zero-Load Balance Condition
Universal Citation: 4 CA Code of Regs 4402
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
The weighing system shall provide a means to indicate that the system is in a zero-load balance condition prior to each weighment. This indication must be verified by the deputy weighmaster prior to the vehicle entering onto the load-receiving element.
1. New section filed 6-9-2014; operative 10-1-2014 (Register 2014, No. 24).
Note: Authority cited: Sections 12027, 12107 and 12735, Business and Professions Code. Reference: Sections 12107 and 12500, Business and Professions Code.
Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
