California Code of Regulations
Title 4 - Business Regulations
Division 9 - Division of Measurement Standards, Department of Food and Agriculture
Chapter 1 - Tolerances and Specifications for Commercial Weighing and Measuring Devices
Article 2.3 - Carbon Dioxide Liquid-Measuring Devices
Section 4029.4 - T. Tolerances

Universal Citation: 4 CA Code of Regs 4029.4

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

T.1. Application.

T.1.1. To Underregistration and to Overregistration. The tolerances hereinafter prescribed shall be applied to errors of underregistration and errors of overregistration.

T.2. Tolerance Values.

T.2.1. On Normal Tests. The maintenance tolerance on "normal" tests shall be two and one-half percent (2-1/2%) of the indicated quantity. The acceptance tolerances shall be one and one-half percent (1-1/2%) of the indicated quantity.

T.2.2. On Special Tests. The maintenance and acceptance tolerance on "special" tests shall be two and one-half percent (2- 1/2%) of the indicated quantity.

T.3. On Tests Using Transfer Standards. To the basic tolerance values that would otherwise be applied, there shall be added an amount equal to two times the standard deviation of the applicable transfer standard when compared to a basic reference standard.

1. New section filed 5-7-93; operative 6-7-93 (Register 93, No. 19).
2. Amendment deleting asterisks filed 11-1-94; operative 12-1-94 (Register 94, No. 44).

Note: Authority cited: Sections 12027 and 12107, Business and Professions Code. Reference: Section 12107, Business and Professions Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.