California Code of Regulations
Title 4 - Business Regulations
Division 9 - Division of Measurement Standards, Department of Food and Agriculture
Chapter 1 - Tolerances and Specifications for Commercial Weighing and Measuring Devices
Article 2.1 - Liquefied Petroleum Gas Tanks when Mounted on Highway Vehicles and Used as Measures
Section 4012.2 - N. Notes
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
N.1. Test Liquid. Water or light fuel oil shall be used as the test liquid for a liquefied petroleum gas tank.
N.2. Evaporation and Volume Change. Care shall be exercised to reduce to a minimum, evaporation losses and volume changes resulting from changes in temperature of the test liquid.
N.3. Gaging. When a liquefied petroleum gas tank is gaged to determine the proper position for an indicator or to determine what a capacity marking should be, tolerances are not applicable. The indicator shall be set and the tank capacity shall be marked as accurately as practicable.
This requirement applies to new liquefied petroleum gas tanks or following repairs or modifications that might affect tank capacities.
N.4. Adjustment and Remarking. When a liquefied petroleum gas tank is found upon test to have an error in excess of the applicable tolerance, the capacity of the liquefied petroleum gas tank shall be adjusted to agree with its marked capacity, or its marked capacity shall be changed to agree with its capacity as determined by the test.
N.5. Inspection. Weights and measures officials shall not inspect or certify liquefied petroleum gas liquid measuring devices until:
1. Amendment deleting subsection asterisks filed 11-1-94; operative 12-1-94 (Register 94, No. 44).
Note: Authority cited: Sections 12027 and 12107, Business and Professions Code. Reference: Section 12107, Business and Professions Code.