California Code of Regulations
Title 4 - Business Regulations
Division 6 - Outdoor Advertising, Department of Transportation
Chapter 3 - Measurements for Placing an Outdoor Advertising Display Along an Interstate or a Primary Highway
Section 2403 - Measuring Distances from an Intersection or an Interchange

Universal Citation: 4 CA Code of Regs 2403

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) An intersection is a system of two or more interconnecting highways without a grade separation providing for the exchange of traffic. Only a road, a street, or a highway which enters directly into the main-traveled way of an interstate or a primary highway is regarded as intersecting. An alley, undeveloped right of way other than an interstate or a primary highway, a private road, and a driveway is not regarded as an intersecting street, a road, or a highway. Refer to Diagram 3-2, Figure 1. for an example of measuring from an intersection.

DIAGRAM 3-2

Click here to view image

(b) An interchange is a system of two or more interconnecting highways in combination with a grade separation providing for the exchange of traffic. A grade separation is where one highway is over or under another highway. The interchange includes a highway overcrossing, a highway undercrossing, a roadway, a taper, or a ramp, providing for the exchange of traffic. Refer to Diagram 3-3, Figures 1 through 6 for examples of measuring from an interchange.

(c) The distance from an intersection or interchange is measured as follows:

(1) Where no exit or entrance roadway exists, measure the distance from the edge of the highway structure at grade separation to the point along the edge of the pavement opposite the closest edge of the Display. Refer to Diagram 3-3, Figures 1, 2, 3, and 5 for examples.

(2) Where there is an off ramp from or an on ramp to the main-traveled way, measure along the edge of the pavement from the beginning or end of a pavement taper to the point where the portion of the Display is closest to a pavement taper. Refer to Diagram 3-4, Figure 1 and Diagram 3-3, Figures 1 through 6 for examples.

(d) An interchange or an intersection distance limitation is measured separately for each direction of travel. A Display application is approved for a Facing in a conforming location where an interchange or intersection distance prohibition applies to the opposite side of the freeway if the copy is not visible to traffic proceeding in another direction within the interchange or intersection. Refer to Diagram 3-3, Figures 2, 3, 5, 6 and Diagram 3-4, Figure 1 for examples.

DIAGRAM 3--3

Click here to view image

DIAGRAM 3--4

Click here to view image

1. Amendment filed 6-25-76; effective thirtieth day thereafter (Register 76, No. 26).
2. Renumbering of former section 2403 to section 2402 and renumbering of former section 2404 to section 2403, including amendment of section heading, section and NOTE and new diagrams 3-3 and 3-4, filed 9-20-99; operative 10-20-99 (Register 99, No. 39).

Note: Authority cited: Sections 5250 and 5415, Business and Professions Code. Reference: Section 5408, Business and Professions Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.