California Code of Regulations
Title 3 - Food and Agriculture
Division 2 - Animal Industry
Chapter 1 - Dairies
Article 21 - Milk Inspection Services
Section 627 - Quality Assurance Date

Universal Citation: 3 CA Code of Regs 627

Current through Register 2024 Notice Reg. No. 12, March 22, 2024

(a) Except as otherwise provided in Food and Agricultural Code Section 36004(c), the licensed milk products plant which bottles or packages the following products shall be responsible for affixing the quality assurance date to all containers which are offered for sale to the consumer by a retail store: market milk, market cream, skim or non-fat milk, half and half, sour cream, sour cream dressing, low-fat milk, flavored milk, flavored dairy drink, yogurt, concentrated milk, concentrated skim milk, acidophilus milk, buttermilk and cultured buttermilk, cottage cheese, creamed cottage cheese, homogenized creamed cottage cheese spread, and partially creamed or low-fat cottage cheese.

(b) The quality assurance date shall be readily identifiable by the consumer. If a numerical sequence of months and days is used, it may not be located on the container with other numbers such as factory license number or lot numbers unless such other numbers are clearly identified. If the quality assurance date is used with unidentified code numbers, the date shall be at least the first three letters of the month followed by the day of the month.

The date shall be not less than 3/16" in height, except that it may be reduced to not less than 1/8" in height when applied to the cap area of a container. The date shall contrast with the background by color or clearly legible imprint.

Any means of conveying the quality assurance date shall be so affixed as to insure legibility of any other required information.

(c) The date shall be placed on the various types of containers in accordance with one of the following options:

(1) Glass, rigid plastic, or fiber board:
(A) Embossed, imprinted, or overlaid in fine, clearly visible lettering on the cap or container;

(B) heat or pressure-sensitive seal;

(C) collar or tag.

(2) Plastic bags:
(A) Heat or pressure-sensitive seal;

(B) upper or lower seal margin;

(C) overlay in fine, clearly visible lettering.

(3) Gable-topped rectangular containers:
(A) On informational panel;

(B) upper flat margin above gable.

(4) Flat top, rectangular carton:
(A) On informational panel;

(B) flat panel or margin of top.

(5) Tetrahedral:
(A) Informational panel;

(B) sealed ends;

(C) embossed, imprinted, or overlaid in fine, clearly-visible lettering.

(d) Nothing in this Section shall preclude the removal by the Director of any or all of the involved products from sale prior to the expiration of the quality assurance date if analysis indicates that the product fails to meet applicable bacterial standards.

(e) Deviations from the location of the date of the quality assurance date or the manner of declaring the date, as noted above, may be made only with written permission of the Director.

1. New section filed 3-29-73; designated effective 7-1-73 (Register 73, No. 13).

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.