California Code of Regulations
Title 27 - Environmental Protection
Division 4 - Office of Environmental Health Hazard Assessment
Chapter 1 - Safe Drinking Water and Toxic Enforcement Act of 1986
Article 6 - Clear and Reasonable Warnings
Subarticle 2 - Safe Harbor Methods and Content
Section 25607.10 - Wood Dust Exposure Warnings - Methods of Transmission
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) A warning for consumer product exposures to wood dust by drilling, sawing, sanding, or machining raw wood products meets the requirements of this subarticle if it complies with the content requirements in Section 25607.11 and is provided using one or both of the following methods:
(b) "Raw wood products" include logs, sawn lumber, plywood and composite wood panels, engineered structural wood products, and similar wood products that are for the most part uncoated and have not been processed into other useful products and have the strong likelihood to be sawed, sanded, or drilled so as to generate wood dust.
1. New section filed 8-30-2016; operative 8-30-2018 pursuant to Government Code section 11343.4(b)(2) (Register 2016, No. 36).
2. Change without regulatory effect amending section heading and subsections (a)(1)-(2) filed 1-9-2017 pursuant to section 100, title 1, California Code of Regulations (Register 2017, No. 2).
3. Change without regulatory effect amending section heading filed 8-30-2018 pursuant to section 100, title 1, California Code of Regulations (Register 2018, No. 35).
Note: Authority cited: Section 25249.12, Health and Safety Code. Reference: Sections 25249.6 and 25249.11, Health and Safety Code.
