California Code of Regulations
Title 25 - Housing and Community Development
Division 1 - Housing and Community Development
Chapter 2 - Mobilehome Parks and Installations
Article 3 - Electrical Requirements
Section 1142 - Design and Plan Requirements-Electrical

Universal Citation: 25 CA Code of Regs 1142

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Electrical plans shall include a single line diagram of the electrical equipment to be installed, altered or changed. Complete load calculations of the electrical system shall be provided with plans.

(b) Complete engineering plans, specifications, calculations and supporting data, stamped and signed by an electrical engineer, shall be submitted when the park's electrical main service or any of the electrical wiring system exceeds the voltage of the secondary system.

(c) Any person applying for a permit to install additional electrical equipment in a park shall submit the following information with the application for a permit to construct:

(1) The size of the feeder circuit and overcurrent protection of that feeder circuit; and

(2) The number of lots and the load of any other electrical equipment supplied by the feeder circuit.

1. New section filed 2-19-2013; operative 4-1-2013 (Register 2013, No. 8). For prior history, see Register 2004, No. 28.

Note: Authority cited: Section 18300, Health and Safety Code. Reference: Sections 18501 and 18670, Health and Safety Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.