California Code of Regulations
Title 20 - Public Utilities and Energy
Division 2 - State Energy Resources Conservation and Development Commission
Chapter 4.1 - Flexible Demand
Article 1 - Flexible Demand Appliance Standards
Section 1696 - Data Submittal Requirements
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
The data submittal requirements shown in this section are required pursuant to section 1695 of this Article.
(a) All appliances.
Table A-1: Data Submittal Requirements for All Appliances
Required Information | Possible Answers |
*Manufacturer's Name | |
*Brand Name | |
*Model Number | |
Manufacture date | |
Is a connected device or connected ready device | Connected Device, Connected Ready Device, Neither |
* Identifier information as described in section 1695(a)(2) (l) of this Article.
Table A-2: Data Submittal Requirements for All Connected Devices
Required Information | Possible Answers |
Unit has a unique logical identification accessible to authorized entities | True, false |
Only authorized entities are allowed to change the software configuration | True, false |
Unit has data protection for personal information | True, false |
Unit requires a user to generate a new means of authentication before access is granted to the device for the first time | True, false |
Device supports plain text passwords | True, false |
Plain text passwords, if supported, can be six characters or longer | True, false, not applicable |
Plain text passwords, if supported, can include a combination of alpha, numeric, and special characters | True, false, not applicable |
Unit allows authorized entities to check for software updates from the manufacturer, and to receive and apply available updates | True, false |
Manufacturer provides security update policy and end of security support date | True, false |
At restart, unit automatically restores recently saved settings | True, false |
At restart, unit automatically restores recently saved network connection | True, false |
Unit automatically attempts to reconnect after loss of connection | True, false |
Unit allows the local users to override the schedule and/or delay timer | True, false |
The unit allows authorized entities to change its settings | True, false |
Unit allows the user to restore default settings | True, false |
(b) Pool controls.
The data submittal requirements shown in Table B-1 are required for pool controls.
Table B-1: Data Submittal Requirements for Pool Controls
Required Information | Possible Answers |
Unit communicates using open standards | True, false |
Local control provides for start and stop of pool filter pump and dependent booster pumps and heaters | True, false |
Integrated or separate user interface is provided for setup, selection, and update of the operating schedule | True, false |
Unit retains memory for at least 72 hours without external power | True, false |
System clock has ability to sync with local time automatically | True, false |
The pool control is preprogrammed with a default operating schedule setting | True, false |
Default operation of pool filter pump at >=50% of max rpm starting no earlier than 9 a.m. and ending by 3 p.m. local time | True, false |
Default operation of pressure cleaner booster pump starting no earlier than 9 a.m. and ending by 3 p.m. local time | True, false |
Default operation of electric pool heater starting no earlier than 9 a.m. and ending by 3 p.m. local time | True, false |
No default operation between 4 p.m. and 9 p.m. local time | True, false |
Unit is marked with its manufacturer's name, its brand name, or its trademark; its model number; and its date of manufacture | True, false |
Note: Authority cited: Sections 25213, 25218, 25402(f) and 25402.11, Public Resources Code. Reference: Sections 25216.5(d), 25402(f) and 25402.11, Public Resources Code.