California Code of Regulations
Title 17 - Public Health
Division 3 - Air Resources
Chapter 1 - Air Resources Board
Subchapter 6 - Abrasive Blasting
Article 4 - Performance Standards
Section 92520 - Stucco and Concrete
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
Abrasive blasting of stucco and concrete shall be performed by wet blasting, hydroblasting, or vacuum blasting with the following exceptions:
Dry blasting with a certified abrasive may be used for:
(a) Window and door returns and frames;
(b) Eaves, overhangs and ceilings;
(c) Sweep abrasive blasting except for stucco surfaces;
(d) Completely shrouded structures and blast areas that effectively control emissions;
(e) Abrasive cleaning operations other than aggregate exposure or paint removal related to new concrete construction or repair activity if such operations are performed onsite.
1.
Amendment filed 1-2-76; effective thirtieth day thereafter (Register 76, No.
1).
2. Amendment filed 3-11-76; effective thirtieth day thereafter
(Register 76, No. 11).
3. Amendment of NOTE filed 10-18-82;
effective thirtieth day thereafter (Register 82, No. 43).
4.
Amendment filed 8-30-84; effective thirtieth day thereafter (Register 84, No.
35).
5. Repealer and former section
92520 and renumbering and
amendment of former section
92540 to section
92520 filed 5-1-91; operative
5-31-91 (Register 91, No. 24).
Note: Authority cited: Sections 39600 and 39601, Health and Safety Code. Reference: Sections 41900, 41902, 41904, and 41905, Health and Safety Code.
