California Code of Regulations
Title 17 - Public Health
Division 3 - Air Resources
Chapter 1 - Air Resources Board
Subchapter 6 - Abrasive Blasting
Article 4 - Performance Standards
Section 92510 - Pavement Marking

Universal Citation: 17 CA Code of Regs 92510

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

Surface preparation for raised traffic delineating markers and pavement marking removal using abrasive blasting shall comply with at least one of the following performance standards:

(a) Wet abrasive blasting, hydroblasting, or vacuum blasting shall be used;

(b) Dry abrasive blasting for removal or surface preparation for immediate application of pavement markings of less than 1,000 square feet or for surface preparation for raised traffic delineating markers shall use certified abrasives.

1. Amendment filed 1-2-76; effective thirtieth day thereafter (Register 76, No. 1).
2. Amendment of NOTE filed 10-18-82; effective thirtieth day thereafter (Register 82, No. 43).
3. Amendment of subsection (b) filed 5-1-91; operative 5-31-91 (Register 91, No. 24).

Note: Authority cited: Sections 39600 and 39601, Health and Safety Code. Reference: Sections 41900, 41902, 41904 and 41905, Health and Safety Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.