California Code of Regulations
Title 14 - Natural Resources
Division 7 - Department of Resources Recycling and Recovery
Chapter 3 - Minimum Standards for Solid Waste Handling and Disposal
Article 5.9 - Construction and Demolition and Inert Debris Transfer/Processing Regulatory Requirements
Section 17383.2 - Activities at Solid Waste Facilities
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
(a) C&D wood debris chipping and grinding operations and facilities and CDI debris and inert debris processing operations and facilities are not required to obtain a separate permit or meet the notification requirements of this Article if the activity is occurring at a facility that has a full solid waste facilities permit and the permit authorizes the activity either through a specific condition in the permit or as a described and approved activity in a Report of Facility Information.
(b) Notwithstanding, C&D wood debris chipping and grinding activities when located at a solid waste facility which has a full solid waste facilities permit shall satisfy the requirements of sections 17383 and 17383.3 (b) through (k) except if material is used on site.
1. New section filed 7-10-2003; operative 8-9-2003 (Register 2003, No. 28).
Note: Authority cited: Sections 40502, 43020 and 43021, Public Resources Code. Reference: Sections 40053, 43020 and 43021, Public Resources Code.
