California Code of Regulations
Title 14 - Natural Resources
Division 1.5 - Department of Forestry and Fire Protection
Chapter 4 - Forest Practices
Subchapter 7 - Administration
Article 5 - Standardized Stocking Sampling Procedures
Section 1072.3 - Equipment

Universal Citation: 14 CA Code of Regs 1072.3
Current through Register 2024 Notice Reg. No. 38, September 20, 2024

The following equipment and methods for measuring distance are acceptable when basal area, point count, or combination Stocking sampling procedures are used. Hand compass and pacing may be used for locating plot centers. A measuring tape or other calibrated measuring device shall be used for determining the radius of plots. For basal area and combination Stocking sample procedures, an angle-gauge, wedge prism, or other device capable of measuring ocularly a predetermined angle (to determine basal area) will normally be needed.

1. Change without regulatory effect amending section filed 10-31-2017 pursuant to section 100, title 1, California Code of Regulations (Register 2017, No. 44).

Note: Authority cited: Sections 4551 and 4587, Public Resources Code. Reference: Section 4587, Public Resources Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.