California Code of Regulations
Title 13 - Motor Vehicles
Division 3 - Air Resources Board
Chapter 4 - Criteria for the Evaluation of Motor Vehicle Pollution Control Devices and Fuel Additives
Article 1 - Fuel Additives and Prototype Emission Control Devices
Section 2208.2 - Certification and Installation Procedures for Medium- and Heavy-Duty Vehicle Hybrid Conversion Systems

Universal Citation: 13 CA Code of Regs 2208.2

Current through Register 2024 Notice Reg. No. 38, September 20, 2024

(a) Applicable Test Procedures

The "California Certification and Installation Procedures for Medium- and Heavy-Duty Vehicle Hybrid Conversion Systems" are the certification and installation procedures that shall apply for California approval of systems that convert the following non-hybrid base vehicles to operate as a hybrid:

(1) A 2007 and subsequent MY base vehicle of between 6,001 and 8,500 pounds GVWR, where the conversion enables the vehicle to achieve at least 35 miles AER;

(2) A 2007 and subsequent MY base vehicle of between 8,501 and 14,000 pounds GVWR; and

(3) A 2010 and subsequent MY base engine certified by ARB for installation in a vehicle over 8,500 pounds GVWR.

1. New section filed 10-16-2017; operative 10-16-2017 pursuant to Government Code section 11343.4(b)(3) (Register 2017, No. 42).

Note: Authority cited: Sections 39515, 39600, 39601, 43000 and 43006, Health and Safety Code. Reference: Sections 43000, 43004, 43006, 43008.6 and 43013, Health and Safety Code; and Sections 27156 and 38391, Vehicle Code.

Disclaimer: These regulations may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.