California Code of Regulations
Title 11 - Law
Division 5 - Firearms Regulations
Chapter 6 - Certified Firearm Safety Device Laboratories, Firearm Safety Device Standards and Testing, and Standards for Gun Safes
Article 6 - Firearm Safety Device Laboratory Certification Renewal; Firearm Safety Device Laboratory Certification After Expiration
Section 4105 - Firearm Safety Device Laboratory Certification Renewal Procedures
Current through Register 2024 Notice Reg. No. 38, September 20, 2024
An FSD Laboratory Certification must be renewed prior to expiration in order to remain valid. The procedure for FSD Laboratory Certification renewal is as follows:
(a) The DOJ will mail an application to the laboratory 60 days prior to the expiration date of the FSD Laboratory Certification.
(b) The Certified FSD Laboratory wishing to renew its FSD Laboratory Certification shall submit to the DOJ an Application for Firearm Safety Device Laboratory Certification, Form BOF 019A (Rev. 01/2012).
(c) When all applicable requirements are met and the application has been processed, the DOJ will renew the laboratory's FSD Laboratory Certification.
(d) If a laboratory fails to comply with these renewal requirements, the FSD Laboratory Certification shall expire by operation of law at midnight on the expiration date stated on the FSD Laboratory Certification.
1. Change without
regulatory effect renumbering section
977.70 to section 4105 filed 6-28-2006
pursuant to section
100, title 1, California Code of
Regulations (Register 2006, No. 26).
2. Change without regulatory effect
amending article heading, section heading, subsection (b) and NOTE filed 12-27-2011
pursuant to section
100, title 1, California Code of
Regulations (Register 2011, No. 52).
Note: Authority cited: Sections 23650 and 23655, Penal Code. Reference: Sections 23650 and 23655, Penal Code.
