Arizona Administrative Code
Title 9 - HEALTH SERVICES
Chapter 7 - DEPARTMENT OF HEALTH SERVICES - RADIATION CONTROL
Article 8 - RADIATION SAFETY REQUIREMENTS FOR ANALYTICAL X-RAY OPERATIONS
Section R9-7-803 - Enclosed-beam X-ray Systems

Universal Citation: AZ Admin Code R 9-7-803

Current through Register Vol. 30, No. 38, September 20, 2024

A. Enclosed beam x-ray systems are exempt from other equipment requirements contained in this Article provided the enclosed beam x-ray systems are designed and constructed so that radiation levels measured at 5 cm from any accessible surface of the enclosure housing the x-ray source do not exceed 5 µSv (0.5 mrem) in one hour

B. A registrant using enclosed beam x-ray systems shall comply with applicable provisions R9-7-804(A), R9-7-805(B), and 9 A.A.C. 7, Article 4.

C. A person who maintains or services analytical x-ray systems, shall:

1. Obtain permission in advance from the radiation safety officer before bypassing interlocks or other safety devices,

2. Label equipment as "out of service" until maintenance or service is completed,

3. Wear extremity personnel monitoring devices, and

4. Ensure that interlocks or other safety devices are operating upon completion of maintenance or service.

Disclaimer: These regulations may not be the most recent version. Arizona may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.