Arizona Administrative Code
Title 4 - PROFESSIONS AND OCCUPATIONS
Chapter 34 - BOARD OF MANUFACTURED HOUSING
Article 7 - PLAN APPROVALS
Section R4-34-705 - Accessory Structures

Universal Citation: AZ Admin Code R 4-34-705

Current through Register Vol. 30, No. 38, September 20, 2024

A. For manufactured homes, mobile homes, and FBBs, a properly licensed entity or person shall comply with R4-34-102 and applicable HUD requirements when preparing attached accessory structure plans. The plans shall include the following:

1. Dimensioned drawings and details identifying all applicable components and specification lists. Electrical, plumbing, gas, and HVAC systems, as applicable, shall be addressed;

2. Design-analysis calculations for all loads and systems; and

3. Method of attachment to the manufactured home, mobile home, or FBB.

B. The Department may approve a design that does not comply with subsection (A) based on a demonstration by an Arizona registered engineer that the design meets standards at least equivalent to those in subsection (A).

C. A properly licensed entity or person shall submit plans, which are sealed by an Arizona registered engineer, for all attached accessory structures except skirting systems that have manufacturer installation instructions and HVAC systems.

Disclaimer: These regulations may not be the most recent version. Arizona may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.