Arizona Administrative Code
Title 4 - PROFESSIONS AND OCCUPATIONS
Chapter 34 - BOARD OF MANUFACTURED HOUSING
Article 7 - PLAN APPROVALS
Section R4-34-703 - Drawings and Specifications

Universal Citation: AZ Admin Code R 4-34-703

Current through Register Vol. 30, No. 38, September 20, 2024

A manufacturer of FBBs shall submit to the Department plans that comply with the applicable standards in R4-34-102. The manufacturer shall ensure the plans provide or have the following information or format attributes:

1. Dimensioned drawings and details identifying process descriptions, component specification lists, shop drawings, and other documents that specify and identify each component, process, assembly operation, and manufacturing step. Include electrical, plumbing, gas, and HVAC systems;

2. A traceable identification for each closed panel component listed;

3. Design analysis calculations for all loads and systems;

4. The location and process for stamping the permanent serial or identification number on the FBB;

5. The location of the Modular Manufacturer Certificate; and

6. Dimensional plans and details identifying all components and construction to be field installed.

Disclaimer: These regulations may not be the most recent version. Arizona may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.