Arizona Administrative Code
Title 4 - PROFESSIONS AND OCCUPATIONS
Chapter 34 - BOARD OF MANUFACTURED HOUSING
Article 6 - MANUFACTURING, CONSTRUCTION, AND INSPECTION
Section R4-34-603 - FBBs

Universal Citation: AZ Admin Code R 4-34-603

Current through Register Vol. 30, No. 38, September 20, 2024

A. A manufacturer shall construct an FBB according to the applicable standards in R4-34-102 and:

1. Provide a complete set of drawings and specifications to the Department under R4-34-703(B);

2. Affix a permanent serial or identification number to each module or panel during the first stage of manufacturing. If an FBB has multiple sections, the manufacturer shall ensure each module or panel is separately identified. The serial or identification number location and application method shall be shown in the plans required under R4-34-703; and

3. Affix a Modular Manufacturer's Certificate to each completed module of each modular building where indicated in the plan required under R4-34-703(B)(5). A Modular Manufacturer's Certificate is not required for a panelized building.

B. The Department may require a manufacturer of an FBB that is produced and shipped before plan approval to remove the FBB from this state and remove the Modular Manufacturer's Certificate based on the Department's assessment of the following factors:

1. Probable harm to public safety and welfare,

2. Previous violations of a similar nature, and

3. Manufacturer's failure to comply with plan submittal and requirements.

Disclaimer: These regulations may not be the most recent version. Arizona may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.