Arizona Administrative Code
Title 4 - PROFESSIONS AND OCCUPATIONS
Chapter 30 - BOARD OF TECHNICAL REGISTRATION
Article 3 - REGULATORY PROVISIONS
Section R4-30-302 - Electrical Plans
Universal Citation: AZ Admin Code R 4-30-302
Current through Register Vol. 30, No. 38, September 20, 2024
A. A registrant shall prepare and submit drawings and specifications for a new electrical system or an addition or modification to an existing electrical system provided the service and associated electrical feeders exceeds 600 amperes 120/240 volts, single phase or 225 amperes 120/208 volts, three phase and the fault current exceeds 10,000 amperes.
B. In all cases a registrant shall design:
1.
Electrical installations in hospitals or other buildings with surgical
operating rooms regulated by Article 517 of the National Electrical code (1990
edition) incorporated herein by reference and on file with the Office of the
Secretary of State.
2. Electrical
installations in locations classified as hazardous in Article 500 of the
National Electrical Code (1990 edition) incorporated herein by reference and on
file with the Office of the Secretary of State.
3. Electrical installations in locations
classified as hazardous in Article 500 of the National Electrical Code (1990
edition) with the exception of gasoline dispensing or repair garages.
4. A registrant shall design an alarm or
signaling system that is required for life safety or code compliance.
Disclaimer: These regulations may not be the most recent version. Arizona may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
